Properties:
PNZ-HOLZ-WACHS W (PNZ-WOOD-WAX W) is strongly water repellent. The coat is open-pored and vapour permeable. Coloured PNZ-HOLZ-WACHS W protects wood from greying through use of the best pigments. Coloured PNZ-HOLZ-WACHS W applied at least twice produces a very weatherproof, satin, water repellent and environmentally-friendly coat, which is very slow to decay. PNZ-HOLZ-WACHS W is also extremely well suited to retreat strongly weathered wood surfaces. Colourless PNZ-HOLZ-WACHS W is used externally to maintain pressure impregnated wooden items, such as garden furniture or wooden toys. PNZ-HOLZ-WACHS is insensitive to beer, wine, fruit juice and water.
D: Safe after coat has dried, certified for colourfastness when exposed to perspiration and saliva acc. To DIN 53160. EN 71, toy safety.
CH: Tested and approved by the Swiss federal office for public health and the environment BAT T No. 82797, toxicity class: safe

Areas of use:
For the protection and enhancement of domestic and exotic timbers both interior and exterior as well as varnished woods. PNZ-HOLZ-WACHS W is suitable for fascia boards, windows, shutters, garden sheds, garage doors, trelliswork, garden furniture, balconies etc., wood composites, plywood, tongue and groove boards, wainscoting, furniture, cork, floorboards, shelving etc. Also for damp rooms such as bathrooms and kitchens as well as heavily used surfaces, for example doors and furniture.

Usage:
Apply coloured PNZ-HOLZ-WACHS W to all sides by brush or spraying and dipping techniques. Spread evenly with a nearly dry brush after approx. 5 -10 min. drying time. A second or possibly third treatment of the visible area is to be undertaken, as described, after a drying time of at least 12 hours. Treatment of all sides is recommended in damp rooms. If a rich surface is required, treat as with exterior wood. Remove all oil paints, thick coat systems and all pore-closing old coats by sanding, stripping or burning. The surface must be sound, porous, clean and free of dust. Clean open-pored coats, sanding if required. Apply coats as previously described.
Application temperature should be above 8°C, wood moisture under 18%.
It has different effects on different surfaces. Trial coats are therefore essential.

Coverage:
1 litre for approx. 15 m2 for the first coat. Dependent on the wood type and surface (rough sawn or planed wood).

Storage:
Cool, but frost-free. Ensure can is well closed.

Cleaning:
Clean tools with soapy water, or PNZ-SPEZIALVERDÜNNUNG (PNZ-SPECIAL-THINNER).

Colours:
See colour chart. All colours may be mixed with each other. If other colours are required, PNZ-HOLZ-WACHS, also the colourless version, can be coloured with universal colouring pastes.

Note:
When using several containers with different lot numbers, they should be mixed together in a large container!

Contents:
In PNZ-HOLZ-WACHS flüssig (PNZ-WOOD-WAX fluid): isoaliphates in PNZ-HOLZ-WACHS W (PNZ-WOOD-WAX W): water. Wax dispersion, purified natural oils, lead-free dryer additives. Odourless after drying. Contains no toxic substances.

Container sizes:
0.75 litres, 2.5 litres, 10 litres, 30 litres and larger.