For inside and outside
Naturally based, non-classified toxicity, coloured wood oil - solvent-free

Properties:
PNZ-COLOR-Öl (PNZ-COLOUR-OIL) is based on a traditional formula dating back many decades and is used as a primer oil with excellent deep penetration for colouring all types of wood. Combined colouring and oiling simplifies priming of wooden floors into a single job.

Areas of use:
To colour and enhance domestic and exotic woods as an initial treatment or for renovation, especially for wooden floors and furniture. Solvent-free oil-based.

Usage:
Apply PNZ-COLOR-Öl thinly after at least one thorough fine sanding with a 180 grain by brush, roller or spraying onto a clean, dry and untreated surface. For woods rich in intrinsic substances, such as oak, doussie, merbau, cork, protrusion of colour from these substances may occur with light coats these can be isolated with PNZ-ISOLIERGRUND (PNZ-BARRIER-PRIMER). Apply over a trial area in all cases. It may be necessary to smooth over the surface with a beige pad and single disc polisher after drying and subsequently apply colourless PNZ-HARTWACHSÖL (PNZ-HARD-WAX-OIL), PNZ-HIGH-SOLID-ÖLWACHS (PNZ-HIGH-SOLID-OIL-WAX), PNZ-INDUSTRIEHARTÖL (PNZ-INDUSTRIAL-OIL) or PNZ-OBJEKTÖL (PNZ-OBJECT-OIL) according to the manufacturer's specifications for surface enhancement of floors or furniture, as protection against pigment abrasion for interiors. This will improve durability. For outside, we recommend colourless PNZ-AUSSENÖL natur (PNZ-EXTERIOR-OIL natural) for the final coat against pigment abrasion: Drying time approx. 12-24 hours, dependent on humidity and temperature. Application temperature above 8°C, wood moisture below 18%.

Coverage:
Approx. 100 ml per m² per coat. These specifications are intended as guidelines. The precise amount depends on the wood type and colour intensity and must be ascertained by testing.

Storage:
Cool and frost-free, seal can tightly.

Cleaning:
Clean tools with soapy water or PNZ-SPEZIALVERDÜNNUNG (PNZ-SPECIAL-THINNER).

Colours:
In 15 attractive colours:
1 colourless, 2 chalk white, 3 larch, 4 dark oak, 5 meranti/teak, 6 merbau, 7 bamboo/limba, 8 light oak, 9 rape yellow, 10 poppy red, 11 graphite black, 12 petrol blue, 13 silver grey, 14 pastel green, 15 crystal blue. All colours may be mixed with each other.
Care:
Dry sweeping, vacuuming. In the case of extreme soiling, wipe with PNZ-HOLZBODENSEIFE (PNZ-WOODEN-FLOOR-SOAP). Freshen up with PNZ-PFLEGEÖL (PNZ-CARE-OIL) or apply PNZ-WACHSFINISH (PNZ-WAX-FINISH). Local repairs can be carried out.

Note:
It has different effects on different surfaces. Trial coats are essential! When using several containers with different lot numbers, they should be mixed together in a large container!

Contents:
Enhanced natural oils, water, wax dispersion, lead-free dryer additives.

Certification:
GGVS and VbF do not apply, non-classified toxicity, DIN 53160-Part C/EN 71.

Container sizes:
0.75 litre, 2.5 litre, 10 litre, and larger